SAP is a highly water absorbent polymer which is a cross-linked poly (sodium acrylate)SAP can absorb 500-1,000 times its weight in water and 50-70 times in synthetic urine; it is essentially water insoluble.SAP absorbs water quickly and once swelled in water, it releases only a little water even under pressure.SAP can be used for a disposable diaper, incontinent underpads, water holding agents for agricultural/horticultural use, industrial dewatering agents, etc. Main application of Waterlock 93B is artificial snow. Characteristics of Waterlock 93S :• Higher efficiency to absorbency.• Superior suction power to absorb liquid.• Higher gel strength.• Hardly releases the water absorbed even pressured in some measure.• Almost no toxicity.• Excellent stability under heat and light.• Not dissolve in water and almost all of solvents. Merit of Waterlock 93S :• Low residual monomer• Low water soluble component• High absorbency under load• Fast absorbing rate
ACURO''s Peracetic Acid 3% is clear, aqueous solution. It is environmentally safe since it decomposes to acetic acid and oxygen. 3% peracetic acid product, because of its high Hydrogen Peroxide Peracetic Acid ratio, it is used in applications requiring preservative action such as industrial water circuits. It also finds use in the food and beverage industries. Properties:
Sodium percarbonate is a free-flowing powder with a common name of solid hydrogen peroxide, it is an addition compound of sodium carbonate and hydrogen peroxide. Sodium Percarbonate has an active available oxygen content which is equivalent to 27.5% H2O2. It breaks down to oxygen, water and sodium carbonate upon decomposition. Sodium Percarbonate offers many of the same functional benefits as liquid hydrogen peroxide.
It dissolves into water rapidly to release oxygen and provides powerful cleaning, bleaching, stain removal and deodorizing capabilities. Besides, sodium carbonate decomposed from sodium percarbonate is able to increase the pH value in washing water to knock down the activities of calcium ion and magnesium ion, thus intenerates water. Another benefit offered by sodium carbonate by raising the pH value is to reduce the negative charges of dirt and fibre resulting in the strengthening repellency between dirt and fibre, which leads to the improvement of bleaching and stain removing effects.
Compared with chlorine bleach, sodium percarbonate based oxygen bleach boasts following advantages in laundry formulations :
No environmental hazards-it breaks down to oxygen, water and sodium carbonate (soda ash) in your wash water.
Ideal stain removal capability; It is very effective as a laundry presoak for heavily stained articles.
It is used to for deodorizing and disinfecting.
Color safe and fabric safe. It brightens colors
Does not weaken the strength of fabrics
Prevents fabric from becoming yellowed or darkened
Many household and personal care products are formulated with an active oxygen-releasing material to effect removal of stain and soil. Oxygen-releasing materials have an important limitation; their activity is extremely temperature-dependent. Temperatures in excess of 60 degree C are normally required to achieve any bleach effectiveness in an aqueous wash system.
Especially for cleaning fabrics, high-temperature operation is both economically and practically disadvantageous. Thus, bleaching activators have been applied in an object to activate bleaching reaction at low temperatures. These activators, also known as bleach precursors, often appear in the form of carboxylic acid esters or amides. In an aqueous , anions of hydrogen peroxide react with the ester or amide to generate a corresponding peroxyacid which oxidizes the stained substrate. Commercial application of this technology is found in certain fabric bleaching detergent powders that mainly incorporating tetraacetylethylenediamine (TAED). TAED used for detergent industry is in granular form, free-flowing, and has several colors (mainly white, green, blue) to choose depending on users' choice.
ApplicationsTAED is typically applied in domestic laundry detergents, automatic dish washing, bleach boosters, laundry soak treatments, to improve the washing performance. TAED could be applied in textile bleaching to react with hydrogen peroxide in the bleach bath to produce a stronger oxidant. The use of TAED as bleach activator enables bleaching at lower process temperatures and under milder pH conditions. In pulp and paper industry, TAED is suggested to react with hydrogen peroxide to form a pulp bleaching solution. The addition of TAED into pulp bleaching solution results in a satisfactory bleaching effect
Sodium percarbonate is a free-flowing powder with a common name of solid hydrogen peroxide, it is an addition compound of sodium carbonate and hydrogen peroxide. Sodium Percarbonate has an active available oxygen content which is equivalent to 27.5% H2O2. It breaks down to oxygen, water and sodium carbonate upon decomposition. Sodium Percarbonate offers many of the same functional benefits as liquid hydrogen peroxide.
It dissolves into water rapidly to release oxygen and provides powerful cleaning, bleaching, stain removal and deodorizing capabilities. Besides, sodium carbonate decomposed from sodium percarbonate is able to increase the pH value in washing water to knock down the activities of calcium ion and magnesium ion, thus intenerates water. Another benefit offered by sodium carbonate by raising the pH value is to reduce the negative charges of dirt and fibre resulting in the strengthening repellency between dirt and fibre, which leads to the improvement of bleaching and stain removing effects.
Compared with chlorine bleach, sodium percarbonate based oxygen bleach boasts following advantages in laundry formulations :
No environmental hazards-it breaks down to oxygen, water and sodium carbonate (soda ash) in your wash water.
Ideal stain removal capability; It is very effective as a laundry presoak for heavily stained articles.
It is used to for deodorizing and disinfecting.
Color safe and fabric safe. It brightens colors
Does not weaken the strength of fabrics
Prevents fabric from becoming yellowed or darkened
Peracetic Acid is an environmentally safe and versatile anti-microbial and a powerful anti oxidant. When Peracetic acid is dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All these degradation products are non-toxic. Peracetic Acid is a very powerful oxidant, whose oxidation potential outranges that of chlorine and chlorine dioxide.
How does Peracetic Acid disinfection work? Peracetic Acid as a disinfectant oxidizes the outer cell membranes of microorganisms. The oxidation mechanism consists of electron transfer. When a stronger oxidant is used, the electrons are transferred to the microorganism much faster, causing the microorganism to be deactivated rapidly.
Table: oxidation capacity of various disinfectants
Disinfectant
EV (electronic volts)
Ozone
2.07
Peracetic acid
1.81
Chlorine dioxide
1.57
Sodium hypochlorite
1.36
Applications
Milk and dairy products processing and packaging plants
Wineries, vineyards and breweries plants
Meat, seafood, poultry and vegetable processing plants
Cleaning, sanitizing and disinfection of UF & RO membranes
Industrial circulating cooling water for both open and closed loops (including food contact)
Wastewater treatment (odor control agent, disinfectant and cleaner)
Hospital and health care facilities, veterinary clinics
Hatcheries and egg processing units
Dish and tableware sanitizer
Advantages
No hazardous or toxic by products (water dioxide, oxygen and water)
More effective than chlorine, chlorine dioxide or quaternary products for sanitizing food contact surfaces
Effective and stable at pH Values 1-9.
Non-foaming and exhibits very low surface tension
No rinse required at levels upto 100 ppm for fruits and vegetables and upto 500 ppm for equipment sanitation use
Does not contribute to TDS
Not persistent in the environment
Does not corrode stainless steel and aluminium
Handling Instruction
Always wear gloves, goggles and faceshield when handling Peracetic Acid
Store in cool, dry place, away from direct sunlight
Never use brass, copper, iron or galvanized metal to come in contact with Peracetic Acid
Peracetic Acid is an environmentally safe and versatile anti-microbial and a powerful anti oxidant. When Peracetic acid is dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All these degradation products are non-toxic. Peracetic Acid is a very powerful oxidant, whose oxidation potential outranges that of chlorine and chlorine dioxide. peracetic Acid as a disinfectant oxidizes the outer cell membranes of microorganisms. The oxidation mechanism consists of electron transfer. When a stronger oxidant is used, the electrons are transferred to the microorganism much faster, causing the microorganism to be deactivated rapidly.
Applications
Milk and dairy products processing and packaging plants
Wineries, vineyards and breweries plants
Meat, seafood, poultry and vegetable processing plants
Cleaning, sanitizing and disinfection of UF & RO membranes
Industrial circulating cooling water for both open and closed loops (including food contact)
Wastewater treatment (odor control agent, disinfectant and cleaner)
Hospital and health care facilities, veterinary clinics
Hatcheries and egg processing units
Dish and tableware sanitizer
Product name:Peracetic acid solution
Main ingredient : Peracetic acid
Appearance :Colorless clear liquid.
Indication:Disinfectant and preservative.(veterinary drugs)sterilization is fast ,safe, and no impairs on animal and people .
Precaution:Avoiding using with the acidic material
Sodium perborate (SPB) is used in the detergent industry as a bleaching agent. The crystalline reagent is available inexpensively as a hydrate with the general formula NaBO3 • n H2O (n: 1-4). he reagent offers low toxicity and a long shelf life. SPB is a useful reagent in organic synthesis as a substitute for the unstable, highly concentrated hydrogen peroxide solutions that can pose a significant explosion hazard and are not commercially available.
Sodium perborate is soluble in water and releases hydrogen peroxide, but it is not merely a mixture of hydrogen peroxide and sodium borate. NMR and Raman spectroscopy indicate that in dilute solution, an equilibrium exists that still contains peroxoborate anions
Classification: Carbonate Type: Sodium Percarbonate CAS No.: 144-55-8
Molecular Formular: 2 NaCO3*3H2O
Uses: Widely used as part of family and industrial bleach, detergents, oxidants. Also used for papermaking, textiles and other industries bleach, public facilities cleaning agent, metal surface treatment agent, medicine and the use of disinfectants, such as the smell of disinfectants.
We manufacture high grade Molecular Sieve 3A which does not adsorb any molecule larger than 3A. Our product has high adsorption speed and long life. It is highly useful as a desiccant in chemicals and petrochemicals industries.
Chemical formula: 1/3K2O·3/5Na2O·AL2O3·2SiO2
Technical Specifications
ITEM
3A -1/16”-P
3A-1/8”-P
3A-8x12”-B
3A-4x8”-B
Diameter (mm)
1.6
3.2
1.7-2.4
3.6-4.8
Bulk density (g/ml)
0.70
0.70
0.72
0.72
Abrasion rate (%)
≤0.2
≤0.25
≤0.25
≤0.25
Crush strength (N)
≥50
≥90
≥35
≥90
CO2 capacity (%)
≤1.5
≤1.2
≤2.5
≤2.5
H2O capacity (%)
≥20
≥20
≥20
≥20
Loss on ignition 575OC (%)
≤1.45
≤1.45
≤1.45
≤1.45
Applications
Dehydration of many kinds of liquids e.g. Ethanol
Dehydration of air .
Dehydration of refrigerant
Dehydration of natural gas or methane.
Dehydration of cracked gas ,ethylene ,propylene or butadiene
ACUPOL C42 is low molecular weight carboxylate sulfonate copolymer. It is used in water treatment formulations to provide stabilization for calcium phosphate, calcium carbonate and Zinc. It also works as a strong dispersant, holding silt and other suspended solids in suspension and preventing fouling. It offers high threshold effect properties, works as a crystal modifier and has higher dispersing activity.
We manufacture high grade Molecular Sieve 3A which does not adsorb any molecule larger than 3A. Our product has high adsorption speed and long life. It is highly useful as a desiccant in chemicals and petrochemicals industries.
Chemical formula: 1/3K2O·3/5Na2O·AL2O3·2SiO2
Technical Specifications
ITEM
3A -1/16”-P
3A-1/8”-P
3A-8x12”-B
3A-4x8”-B
Diameter (mm)
1.6
3.2
1.7-2.4
3.6-4.8
Bulk density (g/ml)
0.70
0.70
0.72
0.72
Abrasion rate (%)
≤0.2
≤0.25
≤0.25
≤0.25
Crush strength (N)
≥50
≥90
≥35
≥90
CO2 capacity (%)
≤1.5
≤1.2
≤2.5
≤2.5
H2O capacity (%)
≥20
≥20
≥20
≥20
Loss on ignition 575OC (%)
≤1.45
≤1.45
≤1.45
≤1.45
Applications
Dehydration of many kinds of liquids e.g. Ethanol
Dehydration of air .
Dehydration of refrigerant
Dehydration of natural gas or methane.
Dehydration of cracked gas ,ethylene ,propylene or butadiene
Waterlock® is a highly cross-linked and water insoluble Superabsorbent Polymer (SAP) specially designed for water absorption and water retention in soils located in regions subject to drought. Upon contact with water, these synthetic crystals swell quickly, creating a SAP-Hydrogel by absorbing and retaining a big volume of water and soluble plant nutrients dissolved in it, which will be released to the plant during the soil drying process.
A wide range of trials has been undertaken word-wide in order to prove and demonstrate the benefits of STOCKOSORB® application for plant germination and growth, crop yield and quality, transplanted seedling survival and development as well as for water and fertilizer use efficiency in food, fruit and wood production. Superabsorbent Polymers are more and more also used in many other technical field like e. g. the cable industry, food industry and the green industry including agriculture, horticulture, landscaping and forestry activities
Chlorine Tablets are the newest unique product on the market today specifically designed for emergency water needs for Disaster Relief, Emergency Preparedness, Humanitarian Relief, Natural Disasters, Military, Bulk Water Storage, Camping, Hunting, RV's, Consumer Stock etc. and this is how it works.
The chlorine tablets are comprised of dry chlorine that is EPA (Environmental Protection Agency) registered for use in disinfecting drinking water. Chlorine is the method of choice for drinking water disinfection by more than 98% of the municipalities and rural water districts here in India Each tablet is designed to disinfect 1 Liter of water. Each pack of Chlorine tablets tablets consists of 50 tablets. This 1 pack is enough tablets to disinfect as much as 20 gallons of water. The recommended dosage as listed on the dosage chart included with the pack is for a total chlorine dose of 9 ppm (parts per million) total available chlorine to the prescribed quantity of water. Various sizes of it are available 1gm, 3.5gm, 20 gm.
Chlorine Tablets are the newest unique product on the market today specifically designed for emergency water needs for Disaster Relief, Emergency Preparedness, Humanitarian Relief, Natural Disasters, Military, Bulk Water Storage, Camping, Hunting, RV''s, Consumer Stock etc. and this is how it works.
The chlorine tablets are comprised of dry chlorine that is EPA (Environmental Protection Agency) registered for use in disinfecting drinking water. Chlorine is the method of choice for drinking water disinfection by more than 98% of the municipalities and rural water districts here in India Each tablet is designed to disinfect 1 Liter of water. Each pack of Chlorine tablets tablets consists of 50 tablets. This 1 pack is enough tablets to disinfect as much as 20 gallons of water. The recommended dosage as listed on the dosage chart included with the pack is for a total chlorine dose of 9 ppm (parts per million) total available chlorine to the prescribed quantity of water. Various sizes of it are available 1gm, 3.5gm, 20 gm.
Sodium dodecyl benzene sulfonate is a white to light yellow flakes, granules or powder. It is soluble in water. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. It is used as a synthetic detergent.
EDTA is a white crystal powder.It is insoluble in common organic solvents.
Properties: EDTA is a white crystal powder.Its melting point is 240°C(decomposition).Its dissolving degree in water is 0.5g/l(25°C).It is insoluble in common organic solvents.It is soluble in boling water 160 time as much .and soluble in alkali solvents like sodium hydroxide.At 150°C,it shows the tendency to depart from carboxyl.
Uses: Mainly applied to complexing metal ions, and separating metal; used as water-treating agents and scale-eliminating agents; capable of preventing the harmful effects on production caused by metal ions in water ; also used in the cleaning the boilers in large-scale power plants.
Ethylenediaminetetraacetic acid:
EDTA offered by our company is available various grades and composition. The demand for the EDTA offered by us is also very high in the domestic and international market. We have also received appreciation from the clients for the superior quality and affordable cost of our EDTA.
Range
EDTA Disodium
EDTA Tetrasodium
We are one of the trusted names among the principal, EDTA Tetrasodium manufactures and exporters. We manufacture premium quality EDTA Tetrasodium which is made from supreme quality materials and are widely used in varied industries. The EDTA Tetrasodium provided by us is in wide demand in the market because of its compositional accuracy. We offer our EDTA Tetrasodium in different specifications to suit different needs of our diverse client base. The composition of the Burnt Lime makes it appear white in color and the content varies from 90% to 80%. The Burnt Lime provided by us is in wide demand in the market because of its capacity to generate.
