• Recommended dosage is 0. 2 - 0. 5% depending on usage conditions and level of turbidity.

• 10 kg paper bags or 25 kg HDPE drums.

• HS Code: 39069090

Anionic Polyelectrolyte Liquid - Acurofloc AL30 range provides an outstanding saving concerning make up time, addition and dosage, being, thus, its addition, in automatic systems for control or dosage, easier and more economical. The solution stability as well as its steady quality makes this range the perfect alternative for purification systems, automatic pH control processes, solid in suspension and high disposal risk, for instance those generated in galvanic lines. Ready-to-use anionic polyelectrolyte Acurofloc AL30 in aqueous solution, having a high concentration and stability. Specially designed for high pollutant concentration physical-chemical purification. It dosage in line is 1:20, without any previous preparation or mixing, being in consequence suitable for high technology industrial waste water treatments such as electronic or nuclear industries.

Other Details:

• HS Code: 39069090

Dosage:

• Recommended dosage is 0. 2 - 0. 5% depending on usage conditions and level of turbidity.

Packing:

• 10 kg paper bags or 25 kg HDPE drums.

Other Details:

• HS Code: 39069090

We are one of the leading manufacturers, suppliers and exporters of Dewatering Polyelectrolyte (DWPE), DWPE is a high molecular weight polyelectrolyte in powder form. It is used for dewatering of organic sludge from sewage, pharmacy biotechnology industry. The product is highly effective in dewatering of organic sludge from pharmacy effluent.

Application and Dosage:

• Dewatering Polyelectrolyte (DWPE) dry polymers are recommended for the following solid-liquid separation process
• Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.

Features Benefits:

• Economical to use-effective at very low dosage levels
• Perform well over a wide pH range
• Improve throughput and cake solids
• Achieve high solids capture
• Easily sealable in water
• Dry product minimizes storage requirement

Other Features:

• Water Clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
• Dissolved Air Flotation - result in cleaner subnatants, increased float solids and greater throughput.
• Thickening - improved compaction, settling drainage and effluent quality.
• Filtration - improve filtered water quality and plant throughput.

Handling Measures Precautions:

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage:

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sun light.

Packing:

• It is available in 10kg/25kg bags.

Other Details:

• HS Code: 39069090

• Effective at low dosages
• Easy to prepare solution and apply
• Completely miscible with water

• Rapid settling.
• Marked increase in underflow density
• High filtration rate
• Increased throughput
• Improved filter clarity
• Efficient filter cake washing.

• HS Code: 39069090

ACURO's Cationic Polyelectrolyte Liquid has the same features as the anionic range but having, moreover, a high separation an precipitation efficiency with oils, taladrines and organic compounds, where this range simplifies treatments. It is a ready-to-use cationic polyelectrolyte in aqueous solution, having a high concentration and stability. Used in physical-chemical depurations having a high pollutant concentration. Its dosage with water is 1:20, it does not need any previous preparation or mixing thus it is suitable for high nuclear technology and electronic waste water treatments.

Other Details:

• HS Code: 39069090

ACURO bring to you a range of Polyelectrolytes for treatment of water from various processes. We offers top quality products, services and solution to all water related needs of various industries.

Non-Ionic Polyelectrolyte has been specially designed to work with max acidity level systems, providing flocculation effect at pH around 4, without needing a previous neutralization, thus not needing to add electrolytes to the process, minimizing the consequence of conductivity increase problems due to dissolved salts.