Properties:White powder, density1.15, melting point 155-160°C, slightly soluble in water, insoluble in ethanol and acetone.
Application: This product function as sulfuration Reagent for Fluorin Rubber, Crylic Acid Ester Rubber and Polyamido-methylacid ester Rubber. After applied, it will keep rubber with original fresh color. This product is poisonless. It is stable even after a long period exposure and will not react when exposed to the atmosphere.
Therminol 55 is a unique, synthetic heat transfer fluid designed to provide reliable, consistent heat transfer performance over a long life. This heat transfer fluid is a superior cost-performance alternative to common mineral oil-based heat transfer fluids. Appearance Clear, yellow liquid Composition Synthetic hydrocarbon mixture Moisture Content, Maximum 250 ppm Flash Point (ASTM D-92) 177 °C (350 °F)Fire Point (ASTM D-92) 218 °C (425 °F)Density at 25 °C 868 kg/m3 (7.25 lb/gal)Specific Gravity (60 °F/60 °F) 0.876Coefficient of Thermal Expansion at 200°C 0.000961/ °C (0.000534/ °F) Therminol 55 is non-corrosive to metals commonly used in the design of heat transfer systems.
ACUTHERM 3101 is a superior quality DEHA and hydroquinone based boiler water oxygen scavenger and Condensate Line Protection chemical product scientifically formulated for steam boilers and boiler water treatment applications. ACUTHERM 3101 is a volatile liquid, catalyzed solution of diethylhydroxylamine (DEHA). It is used to remove dissolved oxygen from boiler, closed loop, and other industrial waters. It minimizes oxygen pitting and corrosion potential. ACUTHERM 3101 is designed for use in many types of steam or hot water boiler systems. ACUTHERM 3101 provides outstanding protection for boiler systems from oxygen corrosion together with excellent feed water and boiler system passivation. Product Benefits : • High performance DEHA based oxygen scavenger for steam and boiler systems• Good condensate line protection• Outstanding protection from oxygen corrosion• Excellent feed-water and boiler system passivation• ACUTHERM 3101 is an all organic formula designed to replace hydrazine as an oxygen scavenger in boiler systems. It is very efficient in its removal of dissolved oxygen from industrial boiler and process water, with reaction times that are substantially faster than hydrazine.• It does not contribute TDS to boiler water. It can easily be controlled by simple analytical procedures.• ACUTHERM 3101 can be used to effectively remove oxygen from steam systems operating at pressures up to 850 psig.
DEHA (N,N- Diethylhydroxylamine)is a colourless to pale yellow transparent liquid, available as 98% DEHA and also as 85% solution in water. Application Areas :Water Treatment :• DEHA is used in Water Treatment Chemical Formulations for controlling corrosion in boiler very effectively due to its property of oxygen scavenging.It scoresover conventional hydrazine hydrate since it is far less toxic and meets the standard for disposal of blow offs without any difficulty giving a good protection against corrosion at the same time. Polymerization :• DEHA's powerful free radical scavenging ability coupled with its moderate volatility and relatively low order of acute toxicity makes it an ideal "popcorn Polymer "/ vapour phase inhibitor for olefins or styrene monomer storage & recovery system.Because of its capability of inhibiting polymerization in the gas phase, DEHA is finding use as an in-process inhibitor for the production of styrene, divinylbenzene, butadiene, isoprene and other monomers containing a reactive double bond. Photographic Chemicals :• DEHA has reducing property, so it is used as an auxiliary chemical photographic developer for instant colour photos. Also, DEHA is effective in stabilization of image and in the prevention of discolouration. Decolourisation :• Phenol and Phenolic antioxidants can be decolourised with DEHA. Inhibitors :• DEHA can be used as a colour stabiliser of monoalkyl phenol. Silicon Rubber :• DEHA can be used as a raw material for the hardener of the Silicon Sealant and coating agent.
Carbohydrazide is used as an oxygen scavenger in water treatment for boilers. It is an alternative to the hazardous and potentially carcinogenic hydrazine. Carbohydrazide reacts with oxygen to make water, nitrogen and urea. It also passivates metals and reduces metal oxides converting ferric oxide to ferrous oxide and converting cupric oxide to cuprous oxide. It is widely used in the production of drugs, herbicides, plant growth regulators, and dyestuffs. Carbohydrazide is a white crystalline solid with a melting point of 153-154 °C. It decomposes upon melting. It is very water soluble and largely insoluble in organic solvents. Uses :• Oxygen scrubber: carbohydrazide is used as an oxygen scrubber in boiler systems. Oxygen scrubbers remove oxygen gas from the boiler system to prevent corrosion.• Polymers: carbohydrazide can react with many aromatic compounds to create polymers.Carbohydrazide can be used as a curing agent for epoxide-type resins.• Photography: carbohyrazide is used in the silver halide diffusion process as one of the toners. Carbohydrazide is used to stabilize color developers that produce images of the azo-methine and azine classes.• Carbohydrazide has been used to develop propellants stabilize soaps, and used a reagent in organic synthesis.
Diethylhydroxylamine (DEHA) has been utilized as an oxygen scavenger in boiler systems in many industries for the past 20 years. Its unique combination of properties, such as volatility; the ability to passivate steel surfaces and its very low toxicity makes it the oxygen scavenger of choice for many applications. The application of DEHA in a number of different systems is discussed in this article and its performance is compared with hydrazine and sulfite. Deha Performance Characteristics DEHA has a number of beneficial properties as an oxygen scavenger in boiler feedwater systems: 1. Rapid complete oxygen removal under typical boiler feedwater temperature and pH conditions. 2. Promotes passivation of internal surfaces in the boiler system. 3. It is volatile similar to a neutralizing amine with the ability to distilled off the boiler, and is available to protect the entire steam condensate system as well as the feedwater and boiler system. 4. Under the action of heat, some of the DEHA is degraded to yield two neutralizing amines which assist in elevating the pH in the condensate. 5. It has very low toxicity making it safe and easy to handle in typical boiler application systems.
Effervescent Effervescent Chlorine Tablets based on a dry chlorine compound, sodium dichloroisocyanurate anhydrous (DCCNa or SDIC) which is blended with effervescent components before being compressed into tablet form. The result is a fast-dissolving, highly convenient, safer and more accurate alternative to liquid bleach. Disinfecting solutions prepared from Effervescent Chlorine Tablets containing SDIC are fast acting and have a complete spectrum of biocidal activity. Bacteria, bacterial spores, algae, fungi, protozoa and viruses are sensitive to their effects. The tablets are formulated for accurate treatment of Water. These Tablets are available in different strengths for treatment of Water from 1 liter to 100000 liters of water.
Descaling Chemical for Boilers, eliminate limescale, calcium deposits, rust and more from HVAC and process manufacturing equipment. When optimum performance for your industrial plate and frame heat exchangers, heat exchangers tubes, evaporative coolers, HVAC cooling towers, boiler tubes or chiller tubes is needed, trust industrial descaling chemicals and re-circulating systems to deliver top performance. Descaling solutions remove lime scale, remove calcium and remove rust, plus other water scale buildup, mud and other non-soluble deposits safely and effectively. Cleaning industrial heat exchangers tubes with descaling systems and descaling chemicals improves efficiencies and helps your heat exchanger deliver top performance on critical applications. ScaleBreak industrial descaling liquid can be used in our descaling systems or directly in water cooling towers, evaporative coolers, boiler tubes, chillers, plate heat exchangers and much more.
ACUROCLEAN SP90 - Sulphamic Acid Based Descalant is a powerful powder descalant based on sulphamic acid that is capable of dissolving the most stubborn industrial scale deposits without affecting the metal. AcuroClean SP 90 contains unique inhibiting chemical constituents thatprevent the acid’s attack on the metal surface, ensuring minimum metal loss. AcuroClean SP 90 cleaning method ensures that there is minimum plant dismantling. Thus the cleaning process becomes non-disruptive and turnaround time is fast. Types of Deposits Cleaned :AcuroClean SP 90 addresses all of the following kids of deposits :• Water scales- Greases & Oils- Oxides and heat scales- Process related product residues Applications :• Chilling plant• Evaporator• PHE plant• Condensers• Boilers• Cooling coils• Crystallizers• Dehumidifiers
ACURO is engaged in offering Carbohydrazide Power. Carbohydrazide is used as an oxygen scavenger in water treatment for boilers. Our range of Carbohydrazide has strong reducibility. It can be used as energetic material intermediate also as refinery equipment of preservatives and boiler water treatment of deoxidizer.
ACUROX DI-3 is an environmentally safe and versatile antimicrobial and a powerful disinfectant. When ACUROX DI-3 is dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All the degradation products are non toxic.
No hazardous by-products .More effective than chlorine, chlorine dioxide, quarternary compounds or iodine compounds for sanitizing human contact surfaces .Effective and stable at pH Values 1-10 . Non foaming and exhibits low surface tension .No rinse required at levels upto 100 ppm for food items and upto 500ppm .for equipment or tank sanitation use. Does not contribute to TDS .Not persistent in the environment .Does not corrode metallic surfaces
Water tank surface cleaning and fumigation * Meat, poultry, and vegetable processing plants (with direct food contact) * Disinfection of potable water (Normal dosage 1 ml per 12.5 ltr water) * Hatcheries and egg processing plants (Normal dosage is 80 ppm with contact time of 1 minute for 99.999% microbial kill) * Milk and dairy product plants * Hospital and health care facilities, veterinary clinics * Wastewater treatment (odor control agent, disinfectant and cleaner)
High PH RO Antiscalant High pH RO Antiscalants are super-threshold RO membrane antiscalants and antifoulants which is able to stabilize a wide range of supersaturated salt solutions, thereby preventing the precipitation on the membrane surface. Features: • Precisely processed • Purity • Enhanced shelf life
OCC contains simple sugar molecules which resemble a honeycomb or a zeolite molecule. Due to its unoccupied space, it can absorb many times its own weight in odorous molecules. It also contains amino hydroxyl groups which ionize sulfides and thiol Radicals to form hydroxyl sulfides. The hydroxyl sulfides are converted in the presence of oxygen to amino sulfate.
The sulfate group then separates ionically into a sulfate ion and another amino group which is free to react with another sulfide or mercaptan. Thus, a small amount of OCC can impact large amounts of sulfides and mercaptans. OCC also contains a proprietary acid which reacts with ammonia and amines to convert them to harmless salts.
OCC contains oxygenated terpenes which participate in ionic reactions and are highly reactive toward many odorous compounds.
In summary, OCC encapsulates, emulsifies, and generates specific reactions with odorous gases such as sulfides, thiols, amines, and ammonia to generate decomposition and re-composition reactions with aromatic structures and other circular hydrocarbons. These reactions continue in a series to release key components as they are no longer needed. These components are then free to function in the same reaction chain with other odorous molecules. These released components are self replicating to some degree. This is what allows substantial dilution of OCC while still producing high impact performance
OCC has a specific reactions with odorous gases such as:
Ammonia to generate decomposition and re-composition reactions with aromatic structures and other circular hydrocarbons
Environmental Benefits 1. Low VOC's, low photochemical reactants, non- toxic, non-flammable, no ingredients listed on California Proposition 65 List, ingredients are biodegradable. 2. Economical to us
ACUTHERM 3300 is a liquid formulation of polymeric dispersants and conditioning agents used to inhibit scale and corrosion in boiler water systems. Its complex nature maintains suspended particulates as a large, light floc to ensure removal through normal blowdown. Applications :• ACUTHERM 3300 is used to control iron deposition in systems where the feedwater iron levels cannot be controlled. Also, it is used to inhibit phosphate deposition and deposition due to hardwater intrusion or makeup to the boiler feedwater system. It is compatible with other boiler water chemicals when used at the recommended level. This product is authorized by USDA: Boiler steam produced may contact edible products. Physical Properties :• Color: Dark amber liquid• Specific Gravity: 1.196• Density: 9.97 lbs./gal.• pH: 13.7• Odor: Slight ammonia
ACUTHERM 3301 is a high performance, all-in-one boiler water treatment based on organic tannin with built in alkalinity booster.ACUTHERM 3301 is an excellent corrosion and scale inhibitor scientifically formulated using hydrolysable tannin as an oxygen scavenger plus built in alkalinity booster. ACUTHERM 3301 is designed for the treatment of small boilers. Product Benefits :• High performance all-in-one water treatment formulation for small boilers.• Based on hydrolysable tannin.• Includes built in alkalinity booster.• Offers excellent corrosion and scale inhibitor performance.• Excellent system protection.• Ideal for small boilers. Product Properties :
ACUTHERM 3223 is a concentrated “combination cycle” scale and corrosion inhibitor for steam boilers. ACUTHERM 3223 is designed to provide protection in all types of boilers operating at up to 650 psig where feedwater hardness may be low or high. Advantages :• ACUTHERM 3223 is very effective in controlling boiler oxygen pitting, corrosion and boiler scaling and fouling. It provides “on line” cleaning of carbonate scale and will disperse iron and other foulants in the boiler drum.ACUTHERM 3223 is a proprietary “combination cycle” boiler treatment. ACUTHERM 3223 contains a special blend of organic phosphorous compounds, polymeric scale inhibitors, dispersants, chelants, alkalinity builders, and oxygen scavengers in a single easily applied product. ACUTHERM 3223 offers much greater flexibility in dosage without over-treatment or under-treatment of a boiler system when compared to a typical phosphate cycle treatment program. This makes it a much easier program to control, requiring significantly less testing.• ACUTHERM 3223 is acceptable for treating boilers or steam lines where the steam produced may contact edible products and/or cooling systems where the treated water may not contact edible products in official establishments operating under the Federal meat, poultry, shell egg grading, and egg products inspection programs.
ACURO's Sulphamic Descalant is an efficient descaling agent and is used for cleaning of a variety of industrial equipments and domestic appliances. ACURO's Sulphamic Descalant can be used for removing water and process scales from industrial equipments. Broadly these find use in the chemical and fertilizer industry, rice mills, dairy and food equipments, brewery equipment, marine equipment, sugar industry etc. Features :• Sulphamic Acid has very high shelf life.• Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.• Sulphamic acid has very high effectivity of the descaling.• Complete cleaning can be chemically achieved by Sulphamic acid and does not require post descaling manual cleaning.
ACURO ORGANICS LTD is considered as the prime supplier of Fireside Treatment Chemicals. Known for their various advantages, our offered Fireside Treatment Chemicals are hugely popular among clients in markets. Advantages :• Increase combustion efficiency• Provide cleaner fireside surface• Reduce smoke, acid particle in the flu gas• Raise the pH of resulting ash and neutralize acid attack• Emulsify and disperse water in fuel oils Applications :• Sugar• Chemicals• Fertilizers• Pharmaceuticals• Cogeneration• Refineries• Power• Textiles• Food & Beverage
ACUROXILL CH7 - Catalysed Hydrazine Hydrate is widely used as a reducing agent or an intermediate of synthesis in various industrial sectors like water treatment (effluents, industrial boilers), chemical treatment process (metals, mine extraction) or active ingredients synthesis (pharmaceuticals and agrochemicals). Hydrazine hydrate is marketed as a water-based solution at different hydrazine concentration. ACUROXILL CH7 - Catalysed Hydrazine Hydrateis a powerful reducing agent and is marketed in various concentrations. ACUROXILL CH7 - Catalysed Hydrazine Hydratechemical finds itself useful in fields of treatment processes and Synthesis applications. We are engaged in offering a wide range of Hydrazine Hydrate like ACUROXILL CH7 that is known for purity. This hydrate is appreciated for its few mineral residues, low total organic carbon content, low chloride content and metallic impurities. Our range of hydrate is widely applicable in photography, water treatment, agro chemistry, pharmaceutical products and chemicals. Uses :• ACUROXILL CH7 is a useful building block in organic synthesis of pharmaceuticals and pesticides.• ACUROXILL CH7 is converted to solid salts by treatment with mineral acids.• ACUROXILL CH7 is used in many processes including: production of spandex fibers, as a polymerization catalyst; in fuel cells, solder fluxes; and photographic developers, as a chain extender in urethane polymerizations, and heat stabilizers.
ACUROCOR 213 is an organic, cationic, moderately, foaming, liquid acid inhibitor designed to inhibit the attack of Hydrochloric Acid on Copper, Brass, Iron and steel, during industrial cleaning and pickling operations. ACUROCOR 213 is non-toxic and the formulation does not contain Arsenic,Antimony, Cadmium, Lead, Mercury or CFCs.ACUROCOR 213 is very stable at elevated temperatures and none of its components are lost by decomposition.It works even at low dosage and elevated temperatures and is always in solution during the cleaning as it does not salt-out. So uniform and total protection is assured.
Citric acid is a weak organic acid. It is a natural preservative/conservative and is also used to add an acidic, or sour, taste to foods and soft drinks. In biochemistry, the conjugate base of citric acid, citrate, is important as an intermediate in the citric acid cycle, and therefore occurs in the metabolism of virtually all living things. Features :• Modifies metal surface to prevent corrosion• Single product for multiple acids• Imparts excellent pickling• Chloride free• Easily soluble with all acid concentrations
A Non-Chromate Corrosion Inhibitor coating composition for metal surfaces includes at least one inhibitor selected from the group consisting of phosphates, phosphosilicates, silicates, and mixtures thereof, at least one inhibitor selected from the group consisting of titanates, zinc salts, and mixtures thereof, and a carrier for these inhibitors, the carrier capable of placing the inhibitors in proximity with the metal surface. In a preferred embodiment, the coating composition further includes a borate such as boric acid, and a succinate. A preferred phosphate includes calcium dihydrogen phosphate, and sodium titanium oxide is a preferred titanate. The zinc salt can include zinc phosphate or zinc cyanamide.
Product Benefits : 1.Attacks rust, scale and deposits but not on the base metal. 2.Cleans complex equipment with out dismantling. 3.Penetrates and disperses acid soluble deposits. 4.Provides moderate foaming to minimize acid fuming.
Our company is one of the leading manufacturers and suppliers offering unbeatable wide range of Effluent Treatment Chemicals across the Asia at industry leading prices without compromising on the quality of products. Our professionally trained water treatment experts always try to offer effective Effluent Treatment and Sewage Treatment Solutions. Solutions are available for collection tank, primary treatment, aeration system, anaerobic system, secondary treatment, tertiary treatment and sludge thickening, etc.,
ACURO's multifunctional, nitrite-based chemical treatment used for the control of corrosion in closed cooling systems and chilled water systems. It is a liquid product containing a combination of ferrous and non-ferrous corrosion inhibitors, a non-carbonate buffer, scale inhibitors, dispersants and a leak detection dye. Compatible with : Brass, Polyethylene, Polypropylene, SS 304, SS 316, Carbon Steel, Nickel, PVC, Teflon and Vinyl Advantages : • Excellent heat transfer capability • Good pump lubricity • Long service life • No adverse effect on hoses and rubber • Free from chromates and phosphates • Reduces maintenance cost
ACUROCOR S20 is a powdered sulfamic acid blend with Corrosion Inhibitor for Sulphamic Acid and wetting agents designed for cleaning heat transfer surfaces. ACUROCOR S20 is used as a descaler for either boiler water, cooling water or heat exchange systems. ACUROCOR S20 can be used to clean a cooling water system while in operation or the condenser can be isolated. Optimum results are obtained when boiler water is heated to 120-150° F for on-line cleaning. Major Features : •Easy to handle •Dissolves scales rapidly •Offers uniform descaling •Harmless to equipment & hence Prolongs equipment life •Non-hazardous •Non inflammable •So, easy working environment
Swimming Pool Chemical- TCCA /alum/liquid chlorine/copper sulphate/acid
We are counted amongst the topnotch Swimming Pool Chemicals Suppliers in India. Our range of Swimming Pool Water Treatment Chemicals have earned high praise from our clients worldwide as these assist in pool water purification with no hint of residue. Customers can also be eased with the availability of the Swimming Pool Water Chemicals at the most reasonable prices.
No leftover residue
For cleaning swimming pools etc.
Chemicals like TCCA,Liquid Chlorine,Copper Sulphate,Acid and Alum.
Cyclohexylamine is an organic compound. It is a colorless liquid, although like many amines, samples are often colored due to contaminants. It has a fishy odor and is miscible with water. Like other amines, it is a weak base, compared to strong bases such as NaOH, but it is a stronger base than its aromatic analog, aniline. It is a useful intermediate in the production of many other organic compounds.
ACUTHERM 3221 is a concentrated “chelant cycle” scale inhibitor treatment system for steam boilers. It is designed to provide protection from scaling in all types of steam boilers operating at pressures up to 850 psig where feedwater hardness is low to moderate. Advantages :• ACUTHERM 3221 is a proprietary “chelant cycle” scale inhibitor for boilers. It is very effective in controlling boiler scaling and fouling. It can also provide “on line” clean up of carbonate scale, iron and other mineral deposits in the boiler drum, tubes and heat exchanger surfaces. ACUTHERM 3221 is a special blend of EDTA (ethylenediaminetetraacetic acid), organic dispersants, polymers and crystal modifiers. With proper usage, it will inhibit scale formation by chelating and sequestering undesirable metal ions such as calcium, magnesium, iron and copper, preventing their deposition. It offers greater flexibility in application and dosage when compared to a typical phosphate cycle treatment program.
ACUTHERM 3100 is a high performance liquid catalysed sodium bisulphite based oxygen scavenger designed to scavenge oxygen and hence inhibit oxidative pitting corrosion within steam boilers.ACUTHERM 3100 is scientifically formulated to provide outstanding protection from oxygen corrosion. ACUTHERM 3100 will efficiently scavenge oxygen and hence inhibit oxidative pitting corrosion within steam boilers.It is used to remove dissolved oxygen from boiler, closed loop, and other industrial waters. It minimizes oxygen pitting and corrosion potential. It is designed for use in many types steam or hot water boiler systems. Product Benefits :• High performance oxygen scavenger giving outstanding protection from oxygen corrosion.• Excellent inhibition of oxidative pitting corrosion.• Convenient liquid product.• ACUTHERM 3100 is very efficient in its removal of dissolved oxygen from industrial boiler and process waters. It can easily be controlled by simple analytical procedures.• ACUTHERM 3100 can be used to effectively remove oxygen from boiler systems operating at pressures up to 650 psig.
ACUPOL PAA is low molecular weight phosphino carboxylic acid. It is highly effective as dispersant and scale Inhibitor in oil field applications, cooling water treatment and boiler water treatment. It inhibits deposition of Ca / Mg salts (carbonates, sulfates and phosphates), Barium sulfate and other low solubility salts, which are responsible for deposition of scales. The low molecular weight polymer shows good activity over wide range of pH, high hardness and temperature without precipitation. Apart from thermal stability, product has good stability to oxidizing agent like chlorine. ACUPOL PAA is also effective in transporting iron oxide scales. ACUPOL PAA can be monitored with conventional analytical methods.
Perchloroethylene (also called PERC) is a man-made chemical which colorless, nonflammable liquid. The largest user of PERC is the dry cleaning industry. It accounts for 80% to 85% of all dry cleaning fluid used. Textile mills, chlorofluorocarbon producers, vapor degreasing and metal cleaning operations, and makers of rubber coatings also use PERC. It can be added to aerosol formulations, solvent soaps, printing inks, adhesives, sealants, polishes, lubricants, and silicones. Typewriter correction fluid and shoe polish are among the consumer products that can contain PERC. Perchloroethylene evaporates when exposed to air. It dissolves only slightly when mixed with water. It is also used for degreasing metal parts and in manufacturing other chemicals. Tetrachloroethene is found in consumer products, including some paint and spot removers, water repellents, brake and wood cleaners, glues, and suede protectors. Other names for tetrachloroethene include PERC, tetrachloroethylene, perchloroethylene, and PCE.
Perchloroethylene has become the most widely used dry cleaning solvent in the world, essentially because of its efficient solvency, ease of recycling, and the available technology that allows for safe handling.
Benefits of perchloroethylene solvent include:
A heavier specific gravity than water to provide increased mechanical agitation during the wash cycle
Low viscosity and low surface tension to enhance penetration of fibers
Quick evaporation, leaving no residue or odors
Safe for fabrics and dyes commonly found in the fashion industry
These solvents are nonflammable and have neither flash point nor a fire point. And since zoning ordinances are often less restrictive when using nonflammable solvents.
Garnet Sand, We are manufacture wide range of Natural Garnet Sand, which is used in Sand Blasting, Water Jet Cutting, Water Treatment Plant, Optical industries and Polishing etc. Features:• Varied quantity• Free from impurities • Smooth texture Physical Characteristics:
TAED is mainly applied in the detergents as an excellent bleach activator to provide effective bleaching activation at lower temperature and lower PH value. It can greatly boost the performance of peroxide bleaching to achieve more rapid bleaching and improve the whiteness. Besides, TAED has low toxicity and is a non-sensitising , non-mutagenic product, which biodegrades to form carbon dioxide, water, ammonia and nitrate. Thanks to its unique characteristics, it is broadly used in the bleaching system of detergent, textile and papermaking industries.